Canon IJM670 Printable Light Block Solvent Matt 165mic 97395632 50" 1270mm x 30m roll **LATEX / SOLVENT / (UV)Gel**

Other available sizes

Canon | IJM670 | Printable Light Block Solvent Matt 165mic | 97395511 | 36" 914mm x 30m roll

Canon | IJM670 | Printable Light Block Solvent Matt 165mic | 97395631 | 42" 1067mm x 30m roll

Canon | IJM670 | Printable Light Block Solvent Matt 165mic | 97395632 | 50" 1270mm x 30m roll

Printing Guidelines

Allow material to adapt to room conditions for 24 hours before printing. It is recommended to handle the media with cotton gloves. Make sure that the media comes not into contact with grease, oil, silicon, and dirt to avoid printing defects. Load the media with care in the printers. Incorrect loading can cause skewing or creasing. Use a take- up device to prevent wrinkling.

It is recommended to calibrate the printer before printing and to make a test print. Print results will vary for different printer/ink combinations. Canon media profiles include recommended settings for ink restrictions and printer parameters. Depending on fluctuations in environment, printer, ink, media and applications, printer parameters may have to be adjusted slightly, in order to obtain the best results. For high-speed production printing, using an external drying unit is recommended. In order to maintain the flatness of the product prevent too high drying or curing temperatures .

Application Guidelines

It is recommended to let the prints dry at least 24 hours before further processing. IJM670 can be used in- and outdoor without lamination. However, it is recommended protecting its surface when it is subject to abrasion or any other mechanical influences e.g. instant roll-up displays. Cold lamination is advised for protection and obtaining higher contrast and colour brilliance.