Canon IJM628 Polyprop Solvent Satin 170mic 97346729 54" 1370mm x 30m roll **LATEX / SOLVENT / (UV)Gel**

Other available sizes

Canon | IJM628 | Polyprop Solvent Satin 170mic | 97346511 | 36" 914mm x 30m roll

Canon | IJM628 | Polyprop Solvent Satin 170mic | 97003892 | 42" 1067mm x 40m roll

Canon | IJM628 | Polyprop Solvent Satin 170mic | 97346729 | 54" 1370mm x 30m roll

Canon | IJM628 | Polyprop Solvent Satin 170mic | 97346633 | 60" 1524mm x 30m roll

Printing Guidelines

It is recommended to handle the media with cotton gloves. Make sure that the media comes not into contact with grease, oil, silicon, and dirt to avoid printing defects. On some printers and in combination with a very dry environment IJM628 builds up static charge.

This may result in ink spray. Make sure that printers are correctly grounded. It is recommended to calibrate the printer before printing and to make a test print Canon media profiles include recommended settings for ink restrictions and printer parameters. Depending on fluctuations in environment, printer, ink, media and applications, printer parameters may have to be adjusted slightly, in order to obtain the best results.

For high-speed production printing, using an external drying unit is recommended.

Application Guidelines

The film can be easily mounted with and removed from double-sided adhesive tape without any problems.

IJM628 can be used outdoor without lamination. However, we recommend protecting its surface if it is subject to abrasion or any other mechanical influences.

The film has very good lamination characteristics. Make sure that prints are completely dry and that all solvents are evaporated before using IJM628 in Roll-up systems. It is recommended to let the prints dry at least 24 hours.