Canon IJM616 Artist Canvas Satin (M1) 425g/m² 97475559 1620mm x 25m roll **(ECO) SOLVENT/UV GEL/LATEX**

Other available sizes

Canon | IJM616 | Artist Canvas Satin (M1) 425g/m² | 97475557 | 54" 1372mm x 25m roll

Canon | IJM616 | Artist Canvas Satin (M1) 425g/m² | 97475559 | 1620mm x 25m roll 

Canon | IJM616 | Artist Canvas Satin (M1) 425g/m² | 97475592 | 2200mm x 25m roll

Printing Guidelines

Allow material to adapt to room conditions for 24 hours before printing. It is recommended to calibrate the printer before printing and to make a test print. Textiles tend to crease when fed through printer. For minimizing creasing and prevent risk on head- strikes load with care into the printer and always use the take-up unit of the printer.

Increasing the print head-height adjustment will minimize the risk on head-strikes. Print results will vary for different printer ink combinations. Canon media profiles include recommended ink restrictions and printer parameters. Depending on environment and application, printer parameters may have to be adjusted slightly in order to obtain the best results.

The material might, depending on humidity and temperature, shrink until 2-3%. The shrink has to be checked before printing.

Application Guidelines

Initial ink adhesion is poor so allowing the prints to dry at least 24 hrs before finishing is strongly advised.

When using canvas for banners or other hanging applications, be sure to roll over and sew or tape the edges. Inserting grommets through both layers of canvas will add extra strength.

Finishing with varnish is not necessary due to the satin finish of the coating. Varnish will however improve the scratch resistance. Care should be taken when selecting spray to seal canvas. Most sprays work well, but certain types can fail to adhere to the ink or canvas and cause defects.

Always pre-test your varnish before use. Lamination films are not recommended because of the nature and structure of the canvas.