Why use plot-IT?

  • Est since 1965
  • Group turnover - £15 million
  • 5 UK offices with over 100 staff
  • HP Designjet Warranty Provider
  • Autodesk Gold reseller
  • Canon Elite Partner
  • Stratasys - Gold Partner

Search by Brand

  • Xativa
  • Canon
  • Epson
  • CAD Plot
  • HP
  • Xerox
  • Olmec
  • SiHL
  • Innova
  • Neolt
  • Oce
  • Plot-IT
  • Neschen
  • Contex
  • Colortrac Scanners
  • JetMaster
  • DataColor
  • Makerbot
  • Shining 3D
  • Stratasys
  • Drytac
  • Autodesk
  • Summa
  • Ricoh
  • Gera
  • Es-te

Epson Borderless Replacement Pad Kit C13S210102 (SC-P7500/SC-P7500 Spectro/SC-P9500/SC-P9500 Spectro)

  • Description

    Replacing the Borderless Pads

    If you see ink smears on the back of your printouts, you may need to replace the pads for borderless printing. Only replace the borderless pads in the areas where you notice ink on your prints. You do not need to replace all of the borderless pads.

    You need a Borderless Replacement Pad Kit  and a pair of tweezers to perform the replacement.

    1.  Turn off the product, wait for the LCD screen to turn off, and unplug the power cable from the electrical outlet.
    2.  Wait for one minute before continuing.
    3.  Open the front cover.

    4. Using tweezers, pull out the borderless pads in the areas where ink transfer occurs.

    5. Use the cleaning sticks to wipe off the accumulated ink as shown in the following locations:



      Center groove

    6. Bend the leg on a new borderless pad as shown below.
      Note: Do not bend the borderless pad except at the area shown.

    7. Insert the leg of the borderless pad all the way into the hole as shown.

    8. Push the protrusions on the sides of the borderless pad into the grooves on the left and right.

    9. Gently press the borderless pad until it is seated in place.

      Make sure that no part of the borderless pad extends above the surrounding surface. The borderless pad may rub against the print head and damage it.