Neschen NW Wallpaper Latex-UV Sand 175g/m² 6041492 63" 1600mm x 50m roll

Description

Neschen NW Wallpaper Latex-UV Sand 175g/m²:  175g/m² heavy, digital printable non woven wallpaper with a matt 'sand' textured surface printable with Latex and UV-curable inks.  This wallpaper was especially created for latex and UV inks is easy to apply and remove and a great choice for customised photorealistic wall décor applications from use in private homes to large scale commercial projects

With PVC and solvent-free production Neschen "GREEN WALL" products are an eco friendly choice. The smooth wallpaper back allows for an easy installation. Instead of “pasting the paper”, the wallpaper is designed for "pasting the wall" papering, allowing spaces to be transformed quickly and with minimum effort. The no-shrink wallpapers also allow for perfect joints.

FEATURES:

• Approx. 175g/m² heavy, digital printable non woven wallpaper
• Printable with (Eco) Solvent, Latex and UV-curable inks
• Flat Matt after printing
• High opacity
• PVC-free wall covering
• Easy to remove
• Structured surface
• Photorealistic print quality
• Good scratch resistance (depends on inks)
• After printing as wash- and brush-resistant as PVC-based wallpapers
• Up to 160 cm width for maximum print productivity and minimum amount of joints
• Fire classification according to EN 13501-1 printed and unprinted (class C – s1, d0 / hardly flammable)
• Class A fire rating according to ASTM E84
• CE marking / EN 15102:2007+A1:2011
• Certified for 3rd generation HP Latex inks (L300 series) & (L500 series)
• 3" core, printside outside

APPLICATIONS:

• Suitable for indoor application
• Ideal for individual interior design in shopping centres, at trade shows, in museums or the living room
• Fast application process using wallpaper paste
• Improved durability after printing with a compatible varnish

PROCESSING & HANDLING:

• Non-woven wallpaper paste recommended (e.g Metylan secura/Metylan NP from Henkel)
• Processing can be done with standard tools
• No special knowledge necessary
• Can be used on all interior base surfaces that are suitable for applying wallpaper
• The base surface has to be dry, clean, firm, slightly absorbent & smooth
• Very absorbent base surfaces should be primed with a solvent free primer
• Depending on the print technique, print with a 10-15mm overlap or if possible -cut without overlap
• Please ensure adequate curing of the ink before application on the wall