Canon LFM342 Roll-up Film 175mic 97002649 36" 914mm x 30m roll *CRYSTALPOINT / LATEX / SOLVENT / (UV)Gel**

Allow material to adapt to room conditions for 24 hours before printing. It is recommended to handle the media with cotton gloves. Make sure that the media comes not into contact with grease, oil, silicon, and dirt to avoid printing defects. Insert the film with care in the printer. Incorrect loading can cause skewing or creasing.

It is recommended to calibrate the printer before printing and to make a test print. Print results will vary for different printer ink combinations. Canon media profiles include recommended settings for ink restrictions and printer parameters. Depending on environment and application, printer parameters may have to be adjusted slightly in order to obtain the best results.

The film can be easily mounted with and removed from double-sided adhesive tape without any problems. LFM342 can be used without lamination. However, we recommend protecting its surface if it is subject to abrasion or any other mechanical influences.

The film has good lamination characteristics. Make sure that prints are completely dry and that all solvents are evaporated before using LFM342 in Roll-up systems. It is recommended to let the prints dry at least 24 hours.