Neschen Solvoprint Easy Dot Transparent 100mic: With more transparency than Neschen Solvoprint Easy Dot 100 PE Clear this glossy 100mic monomeric, transparent PVC film is the perfect choice for short-term shop window displays, exhibitions and sales. With frosted glass effect and mirror-inverted printing enables the application on the inside of the window.
The newly improved Easy Dot® technology produces stunning displays with high colour brilliance and photorealistic prints for indoor and outdoor applications. The dot adhesive guarantees bubble free application and reverse printing allows the inside application on shop windows. Easy to apply and reposition the base liner provides excellent stiffness for easy handling and perfect flatness for trouble-free sheet feeding through UV-Offset and Screen printing machines.
FEATURES:
- 100 µm monomeric PVC transparent, matt surface
- Transparent glossy surface
- The dot pattern of the adhesive (dot coating) creates air channels between the dots for easy handlings, application & repositioning
- Suitable for (Eco) Solvent- and Latex inks (low light colours recommended)
- Residue-free removable from many surfaces
- Removable adhesive properties
- Special-PVC for printing with solvent-based, latex inks as well as LED UV inkjet printers
- Perfect lay flatness, no restrictions with demanding printers
- B1 fire certification according to DIN 4102-1
- HP certified for 3rd generation latex inks (L300 series)
- High colour brilliance and photorealistic print quality
- Can be applied on smooth and flat surfaces
- No chemical reaction between adhesive and solvent inks
- A slight surface texture can be given due to the dot shaped adhesive
- Car wrapping is not recommended
- The base paper of our release liner comes from a PEFC certified source
- Environment-friendly waterbased adhesive
- 3" core, printside outside
- Also available in 250 m rolls (on 152mm/6" core) for digital-, UV-offset and screen printing
APPLICATIONS:
- Designed for short to mid-term indoor applications such as trade shows & events
- For application to flat surfaces;
- Recommended for indoor applications (at dry weather also short term outdoor use possible)
- For application on glass
PROCESSING & HANDLING:
- Due to the increased UV radiation when printing with UV-curable inks, the PVC film may become brittle prematurely. Own tests are necessarily recommended!
- Printing profiles with low amounts of light colours are recommended to reach the best printing performance
- Easy to remove from nearly all substrates
- mounted on PVC-surfaces, it can remain residue of adhesive when removing
- The removing of the film from heated surfaces (e.g. shop windows, steel surfaces, etc.) is not recommended, otherwise the adhesive may completely stay on the surface. In such cases we recommend cooling down the material and the surface before removing
- To avoid problems in processing/lamination ensure adequate drying before lamination drying time of min. 24 hours is recommended
- Storage is best to be done in upright position in the original case
- Surfaces must be properly prepared and free of contamination
- Applying by assistance of water is not recommended
- Possibly arising adhesive residues can be removed with help of denatured alcohol
- Stretching should be minimised as much as possible to prevent excessive shrinking
- Shrinking of the edges on monomeric vinyl may occur during storage time
