Neschen Solvoprint Glass Deco Silver 80mic: This 80mic polymeric soft-PVC film has a translucent silver effect that is easy to apply and a great choice for creative window decorations. Suitable for use with Eco-solvent, Latex, UVC and screenprinting inks this product has an environmentally friendly, permanent water-based adhesive.
The Solvoprint® Glass Deco PVC films are all “dry-apply”, eliminating the need to use application liquids thus saving time. Using innovative air-matrix technology, fine air channels are created in the adhesive, allowing for fast application and adjustment. Bubbles and creases in the film can easily be avoided.
FEATURES:
- 80 µm Polymeric Soft-PVC
- Translucent silver
- B1 Certificate according DIN 4102-1
- Washable and resistant to a large number of detergents and solvents
- Easy to apply due to micro-channels in adhesive
- Reduced adhesive strength minimizes risk of “stress whitening”
- Printable with (eco)-solvent-, latex- and UV-curable inks as well as screenprinting inks
- Recommended for indoor applications (e.g. on shop windows the media should be applied at the interior side of the glass) – outdoor applications feasable based on Neschen technical informations
- Environmentally friendly, permanent water-based adhesive
- 3" core, printside outside
APPLICATIONS:
- Decoration & Labelling film
- Suitable for cutting plotters
- Milk glass effect
- Printable
PROCESSING & HANDLING:
- Dry application only. The prevents any accumulation of water within the channels which could cause white colouring of the adhesive
- Use cotton gloves to avoid fingerprints on the media
- When applied to windows it is recommended to leave a 2mm gap between film and rubber gasket to avoid any accumulation of water and possible reduction of adhesive strength
- To prevent stripes in the adhesive film the liner should be removed evenly
- When cutting filigree/small letters it is recommended to use a sharp knife and adjust speed
- Usage of PVC application tape with moderate adhesive strength (e.g 2N/25mm) is endorsed
- Due to the increased UV radiation when printing with UV-Curable inks, life of the PVC film may be reduced.
- To avoid any unwelcome scratches on the surface of the film it is recommended to use a very soft squeegee. These scratches will remain in the film when applied on glass and will not disappear.
- After plotting the films should be stored & dispatched laying flat
- Possible adhesive residues can be easily removed using denatured alcohol or benzene
