Neschen Solvoprint Easy Dot 180 180mic: Your high-quality solution for latex, UV-curable inks and UV gel inks. The newly improved easy dot® technology produces stunning displays with high colour brilliance and photorealistic prints for indoor and outdoor applications. The dot adhesive guarantees bubble free application. Easy to apply and reposition the base liner provides perfect flatness for easy handling and mounting.
FEATURES:
- 180 µm monomeric PVC (identical PVC film as solvoprint easy fix 180 MSP)
- White, matt, with very high opacity
- High opacity prevents inhomogenous and coloured surfaces from shining through
- High whiteness for best contrast and more natural-looking pastel colours
- Easiest bubble-free application thanks to the dot-shaped adhesive and the film’s thickness
- “Dot-shaped” adhesive coating for easy application and repositioning
- Removable adhesive properties
- Special PVC for printing with solvent-based, latex, UVgel and UV-curable inks
- High colour brilliance and photorealistic print quality
- Can be applied on smooth and flat surfaces
- No chemical reaction between adhesive and solvent inks
- Slight surface texture can be given due to the dot shaped adhesive
- Car wrapping not recommended
- Base paper of our release liner comes from a PEFC-certified source
- Environmentally-friendly waterbased adhesive
- 3" core, printside outside
APPLICATIONS:
- Dot-shaped glue and the film’s thickness allow the easiest and bubble-free application
- Short to midterm applications like trade shows, seasonal sales.
- Ideal for flat surfaces like doors, exhibition walls
- Low light colours recommended
- Durability (unprinted) up to 2 years- depending on application area & purpose
- For application on a wide range of substrates (on most of the commercially available panels etc.)
- Not suitable for application on freshly lacquered surfaces
PROCESSING & HANDLING:
- The removing of the film from heated surfaces (e.g. shop windows, steel surfaces, etc.) is not recommended, otherwise the adhesive may completely stay on the surface. In such cases it's recommend cooling down the material and the surface before removing.
- To avoid problems in processing/lamination ensure adequate drying before lamination – drying time of min. 24 hours is recommended
- Storage is best to be done in upright position in the original case
- Surfaces must be properly prepared and free of contamination
- Applying by assistance of water is not recommended
- Possibly arising adhesive residues can be removed with help of denatured alcohol
- Stretching should be minimised as much as possible to prevent excessive
- Shrinking shrinking of the edges on monomeric vinyls may occur during storage time
