Turn off the product, wait for the LCD screen to turn off, and unplug the power cable from the electrical outlet.

1. Wait for one minute before continuing.
2. Open the front cover.
   
3. Using tweezers, pull out the borderless pads in the areas where ink transfer occurs.
   
4. Use cleaning sticks to wipe off the accumulated ink in the following locations:

   Bottom

   

   Sides

   

   Centre groove

   
5. Bend a new borderless pad as shown below.
   Note: Do not bend the borderless pad except at the designated spot.
   
6. Insert the leg of the borderless pad all the way into the hole.
   
7. Push the protrusions on the sides of the borderless pad into the grooves on the left and right.
   
8. Gently press the borderless pad until it is seated in place.
   
   Caution:
   Make sure that no part of the borderless pad extends above the surrounding surface. The borderless pad may rub against the print head and damage it.