Canon IJM578 Polyweave Light B1 145g/m² 97003840 42" 1067mm x 45.7m roll **WATER-BASED / LATEX INKS**

Core Size
2 inch, 3 inch, (3" with 2" adaptor)

Width / Size
40" / 42" / 44"

Download
Brochure

Canon IJM578 Polyweave Light B1 145g/m² 97003840 42" 1067mm x 45.7m roll WATER-BASED / LATEX INKS

£359.99 inc VAT

£299.99 ex VAT

Would you like to talk to a specialist about this product?

01905 454598 [email protected]

All you need to know about the Canon IJM578 Polyweave Light B1 145g/m² 97003840 42″ 1067mm x 45.7m roll **WATER-BASED / LATEX INKS**

Description Other available sizes Printing Guidelines Application Guidelines

Canon IJM578 Polyweave Light B1 145g/m²: B1-certified, 100% polyester, light photo textile, with a water-resistant, matt surface, for indoor and short-term outdoor use.

Liquid laminates are compatible and provide excellent surface protection. Always pretest the liquid laminate for compatibility prior to using. It is not recommended to overlaminate with pressure sensitive laminates because they do not have complete contact with the surface of the textured textile.

APPLICATIONS:

Indoor and short-term outdoor signs
Textile banners
Roll-up displays
Banner stands
Wall advertising
Textile blinds (roll-up)

FEATURES:

Excellent print quality, high image sharpness
Fire retardant B1
Moisture resistant
Short-term outdoor (pigment inks)
Can be cut with hot knife without fraying
No edge curl under tension
3" core + 2" adapter

Canon | IJM578 | Polyweave Light B1 145g/m² | 97003839 | 36" 914mm x 45.7m roll

Canon | IJM578 | Polyweave Light B1 145g/m² | 97003840 | 42" 1067mm x 45.7m roll

Side to be printed is the outer side of the roll. Allow material to adapt to room conditions for 24 hours before printing. It is recommended to handle the media with cotton gloves. It is recommended to calibrate the printer before printing and to make a test print. Textiles tend to crease when fed through printers.

For minimizing creasing and prevent risk on head-strikes always use the take-up unit of the printer. Increasing the printhead height adjustment will minimize the risk on head-strikes. To optimize print quality, print-mode should be set for highest print quality. Ink restrictions and printer settings have to be set for specific printer ink combinations to obtain the best results.

Canon media profiles include recommended ink restrictions and printer parameters. Depending on environment and application, printer parameters may have to be adjusted slightly in order to obtain the best results.

Allowing the prints to dry at least 24 hours before finishing is strongly advised. When using for banners or other hanging applications, hemming the edges is recommended. When applying grommets, they should be inserted in double- hemmed edges. Corner grommets should be placed where the length and width hems cross, so that the grommet goes through four layers.

Using glue or pressure sensitive adhesives is not recommended, as this does not prevent the material from natural environmental shrinkage over time. When you use a “hot-knife” to cut this textile, there will be no fraying.

DATA SHEET